Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Doblo
  6. : Instructions for replacing the timing belt on the Fiat Doblò 1.6 Multijet

Fiat Doblo - Video tutorial

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years 2009-2021
Part: Timing belt
Operation: Instructions for replacing the timing belt on the Fiat Doblò 1.6 Multijet

Today we will see, in this short guide, the main instructions for removing and replacing the timing belt on the second series Fiat Doblò, with 1.6 MultiJet engine. First we open the engine hood of our car and begin to remove the side air filter box and the intake sleeve, disconnecting the mass air flow sensor; after which we remove the cover on the timing side, in order to access our belt. At this point we disconnect the V-belt and go to take all the references necessary for the replacement of the timing belt.


Posted on 5 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Doblo 2000-2009 - How soon to replace the timing belt on the Fiat Doblo Cargo? Read Answer
    • Doblo 2009-2021 - How many km do you change the timing belt of the Fiat Doblo? Read Answer

Replace the steering angle sensor on the Volkswagen Golf 5

When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components.

Watch the video!


by ScegliAuto

More videos