Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : Timing belt

Fiat Doblo - Timing belt

Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
Guide to replacing the timing chain of the Fiat Doblo 1.3 Multijet.
Today's main steps will show us how to disassemble and replace the timing chain of the Fiat Doblò, following the instructions below. First, we open the hood …read all…
Posted on 17 February 2024 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How do you replace the timing chain of the Fiat Doblò 1.3 MultiJet?
The replacement of the timing chain of the Fiat Doblò 1.3 MultiJet is done by opening the hood to access the engine compartment. It will be necessary to …read all…
Posted on 6 August 2023 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How to remove the timing belt of the 1.6 methane Doblò.
In this video, we will show you how to remove the timing belt of a Fiat Doblò 1.6 methane. First, make sure you have all the necessary tools as indicated in …read all…
Posted on 13 April 2023 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
How to replace the timing belt on a Fiat Doblò
Remove the belt cover and crankshaft pulley, you have to bring the engine to the first cylinder. You will hold it still with a special marker. Then the fuel …read all…
Posted on 15 May 2024 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
When and how to change the timing belt on the Fiat Doblò 1.6 Multijet
In this video tutorial we will see how to remove and replace the timing belt of the Fiat Doblò 1.6 Multijet, following the instructions below. First of all we …read all…
Posted on 5 April 2024 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How do you replace the Fiat Doblò timing chain?
In order to replace the Fiat Doblò timing chain, the hood must be opened to gain access to the engine compartment. It will be necessary to remove the cover …read all…
Posted on 12 March 2024 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
Instructions for replacing the timing belt on the Fiat Doblò 1.6 Multijet
Today we will see, in this short guide, the main instructions for removing and replacing the timing belt on the second series Fiat Doblò, with 1.6 MultiJet …read all…
Posted on 5 March 2024 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
How to change the timing belt on the Fiat Doblò 1.9 MultiJet
In this video tutorial we will see how to disassemble and replace the timing belt on a Fiat Doblò 1.9 MultiJet, following the instructions below. First we …read all…
Posted on 13 February 2024 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
How to replace the timing belt on Fiat Doblo
How to replace the timing belt on Fiat Doblo. We lift the car on a column bridge, remove the front wheel, use a screwdriver to remove the right wheel rocker. …read all…
Posted on 15 November 2023 by ScegliAuto
Airbags (2) Shock absorbers (4) Antenna (1) Car stereo (5) Anti roll bar (1) Battery (1) Arm (1) Glow plugs (2) Bodywork (2) Control unit (1) Key (2) Timing belt (9) V-belt (1) -board computer (6) Checks and maintenance (36) Oil pan (1) Dashboard (4) Bearing (1) Brake discs (2) Headlight (5) Tail light (4) Particulate filter (1) Air filter (6) Cabin air filter (8) Diesel filter (5) Oil filter (2) Clutch (3) Injectors (2) Headlight bulb (2) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (2) Mask (1) Window motor (1) Starter motor (1) Engine oil (2) Door panel (7) Front bumper (1) Brake pads (2) Pump (1) Door (1) Instrument cluster (9) Radiator (1) Wheel (4) Fuse box (20) Crankshaft RPM sensor (1) Lock (1) Outside rearview mirror (1) EGR valve (3) Interior blower (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos