Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : EGR valve

Fiat Doblo - EGR valve

Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
Disassembly of the EGR valve of the Fiat Doblò
Today's guide will show us how to disassemble and replace the EGR valve of the Fiat Doblò, in simple and quick steps. First, we open the engine hood and begin …read all…
Posted on 15 September 2023 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
Where is the EGR valve located in the Fiat Doblò 1.3 MultiJet?
In this video, we can see where the EGR valve is located in the Fiat Doblò and how to proceed if we need to remove it, for example, to perform a thorough …read all…
Posted on 24 July 2023 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
How to remove the EGR valve on the Fiat Doblò MK1
In this video we will see the instructions that will allow us to remove the EGR valve, in order to replace it or clean it, on the first series Fiat Doblò with …read all…
Posted on 3 March 2024 by ScegliAuto
Airbags (2) Shock absorbers (4) Antenna (1) Car stereo (5) Anti roll bar (1) Battery (1) Arm (1) Glow plugs (2) Bodywork (2) Control unit (1) Key (2) Timing belt (9) V-belt (1) -board computer (6) Checks and maintenance (36) Oil pan (1) Dashboard (4) Bearing (1) Brake discs (2) Headlight (5) Tail light (4) Particulate filter (1) Air filter (6) Cabin air filter (8) Diesel filter (5) Oil filter (2) Clutch (3) Injectors (2) Headlight bulb (2) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (2) Mask (1) Window motor (1) Starter motor (1) Engine oil (2) Door panel (7) Front bumper (1) Brake pads (2) Pump (1) Door (1) Instrument cluster (9) Radiator (1) Wheel (4) Fuse box (20) Crankshaft RPM sensor (1) Lock (1) Outside rearview mirror (1) EGR valve (3) Interior blower (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos