Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : Shocks

Fiat Doblo - Shocks

Shocks Fiat Doblo (2009-2021 / 263, doblo 2, mk 2)

Fiat Doblo (2000-2009 / 223, MK 1, Doblo1)
How to Replace the Rear Shock Absorber on the Fiat Doblò?
To replace the rear shock absorber on the Fiat Doblò, lift the vehicle so you can loosen the bolts securing the rear wheel to its housing. Once the wheel is …Read all…
Posted on 28 July 2026 by ScegliAuto
Fiat Doblo (2000-2009 / 223, MK 1, Doblo1)
Replacing Rear Shock Absorber on Fiat Doblò
In this video tutorial, you will learn how to replace the rear shock absorber on a first-generation Fiat Doblò. First, lift the vehicle from the rear and undo …Read all…
Posted on 14 April 2026 by ScegliAuto
Fiat Doblo (2009-2021 / 263, Doblo2, MK 2)
How to Replace the Shock Absorber on a Fiat Doblo
Want to remove the rear shock absorber on a Fiat Doblo? Follow these steps carefully: loosen the wheel bolts with an appropriate tool (telescopic spanner or …Read all…
Posted on 24 March 2026 by ScegliAuto
Fiat Doblo (2009-2021 / 263, Doblo2, MK 2)
How to Replace the Rear Shock Absorbers
Place the car on a ramp and raise it to a comfortable working height. Remove the rear wheel corresponding to the shock absorber to be replaced. Unscrew the two …Read all…
Posted on 4 March 2026 by ScegliAuto

Shocks Fiat Doblo (2000-2009 / 223, mk 1, doblo 1)

Fiat Doblo (2000-2009 / 223, MK 1, Doblo1)
How to Replace the Rear Shock Absorber on the Fiat Doblò?
To replace the rear shock absorber on the Fiat Doblò, lift the vehicle so you can loosen the bolts securing the rear wheel to its housing. Once the wheel is …Read all…
Posted on 28 July 2026 by ScegliAuto
Fiat Doblo (2000-2009 / 223, MK 1, Doblo1)
Replacing Rear Shock Absorber on Fiat Doblò
In this video tutorial, you will learn how to replace the rear shock absorber on a first-generation Fiat Doblò. First, lift the vehicle from the rear and undo …Read all…
Posted on 14 April 2026 by ScegliAuto
Fiat Doblo (2009-2021 / 263, Doblo2, MK 2)
How to Replace the Shock Absorber on a Fiat Doblo
Want to remove the rear shock absorber on a Fiat Doblo? Follow these steps carefully: loosen the wheel bolts with an appropriate tool (telescopic spanner or …Read all…
Posted on 24 March 2026 by ScegliAuto
Fiat Doblo (2009-2021 / 263, Doblo2, MK 2)
How to Replace the Rear Shock Absorbers
Place the car on a ramp and raise it to a comfortable working height. Remove the rear wheel corresponding to the shock absorber to be replaced. Unscrew the two …Read all…
Posted on 4 March 2026 by ScegliAuto
Airbag (3) Speaker (1) Shocks (4) Antenna (1) Car stereo (8) Anti-roll bar (1) Battery (1) Control arm (1) Spark plugs (1) Glow plugs (3) Body (2) Control unit (1) Key (5) Timing belt (13) V-belt (1) Onboard computer (1) Checks and maintenance (11) Dashboard (7) Bearing (1) Brake rotors (2) Headlight (7) Tail light (4) Diesel particulate filter (2) Air filter (6) Cabin air filter (8) Diesel fuel filter (5) Oil filter (2) Clutch (3) Fuel injectors (2) Side marker bulb (2) Headlight bulb (3) Tail light bulb (4) Interior dome light bulb (2) Instrument panel light (2) Handle (3) Trim cover (1) Power window motor (1) Starter motor (3) Engine oil (6) Clock (23) Door trim panel (8) Front bumper (2) Brake pads (2) Pump (1) Car door (2) Instrument cluster (1) Radiator (1) Wheel (5) Fuse box (29) Crankshaft position sensor (1) Door lock (1) Side mirror (3) Warning light – error code (16) (6) Service warning light (58) Windshield wipers (1) EGR valve (3) Blower motor (1) Side window (1) Steering wheel (9)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos