Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Shock Absorber on a Fiat Doblo

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Shocks

See other generations:
Video tutorial

Want to remove the rear shock absorber on a Fiat Doblo? Follow these steps carefully: loosen the wheel bolts with an appropriate tool (telescopic spanner or air impact wrench), lift the car on a column lift and remove the wheel. Using a socket spanner, unscrew the mounting bolts of the plastic splash guard (at the top), unscrew the bolt located at the side of the rear bumper; slide the shock absorber out of its housing.

Compare the old part with the new one and prepare for installation: insert the shock absorber into its housing and first tighten all the bolts at the top of the shock absorber, then secure the lower part to the wheel hub.


Updated on 6 March 2026 by ScegliAuto


Related tutorials

Replacing Rear Shock Absorber on Fiat Doblò
Replacing Rear Shock Absorber on Fiat Doblò
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) In this video tutorial, you will learn how to replace the rear shock absorber on a first-generation Fiat Doblò. First, lift the vehicle from the rear…
How to Replace the Rear Shock Absorber on the Fiat Doblò?
How to Replace the Rear Shock Absorber on the Fiat Doblò?
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) To replace the rear shock absorber on the Fiat Doblò, lift the vehicle so you can loosen the bolts securing the rear wheel to its housing. Once the w…
How to Replace the Rear Shock Absorbers
How to Replace the Rear Shock Absorbers
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Place the car on a ramp and raise it to a comfortable working height. Remove the rear wheel corresponding to the shock absorber to be replaced. Unscr…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos