Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorbers

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Shocks

See other generations:
Video tutorial

Place the car on a ramp and raise it to a comfortable working height. Remove the rear wheel corresponding to the shock absorber to be replaced.

Unscrew the two bolts and three screws that secure the plastic cover inside the wheel arch and remove it. Locate the shock absorber to be replaced and unscrew the bolts that secure it in position. Before removing it, relieve the tension using a hydraulic jack.

Remove it and replace it with the new one. Repeat the same steps in reverse order. The maintenance operation shown in the images is performed on a Fiat Doblò.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Remove the Radio from a Fiat Doblo
How to Remove the Radio from a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) To remove the radio from your Fiat Doblo, you will need the appropriate extraction keys. Start by sitting in the driver's seat. Then, insert the extr…
How to Replace the Front Strut of the Fiat Doblo
How to Replace the Front Strut of the Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) To replace the front strut on a Fiat Doblo, first open the bonnet and clean the strut mounting bolts with WD40 spray. Using a 13 mm socket, loosen th…
How to Remove the Rear Light of a Fiat Doblò
How to Remove the Rear Light of a Fiat Doblò
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) This brief video guide shows you how to remove the rear light of a first-generation Fiat Doblò, produced from 2000 to 2009. First, open the boot of t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos