Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Fiat Doblò

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Tail light

This brief video guide shows you how to remove the rear light of a first-generation Fiat Doblò, produced from 2000 to 2009. First, open the boot of the vehicle. To remove the light, unscrew the three screws holding it in place. The first two screws are located next to the light and are easily identifiable. The third screw is hidden under the housing cover, as shown in the video. Once all three screws are removed, you can pull out the light and disconnect the bulb wiring to fully remove it.

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the rear headlight of a Fiat Doblò?
How to change the rear headlight of a Fiat Doblò?
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) To change the rear light of our Fiat Doblò, follow these steps. Start by opening the trunk door to access the light, then remove the internal side co…
How to replace the indicator light in the wing mirror of the Fiat Doblò
How to replace the indicator light in the wing mirror of the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) These brief and simple steps will guide you on how to remove and replace the indicator light in the external wing mirror of the Fiat Doblò. First, mo…
Replacement of the rear light bulbs of the Fiat Doblò MK2
Replacement of the rear light bulbs of the Fiat Doblò MK2
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this video we see how if we notice that one of the rear lights of the Fiat Doblò is burnt out, we must proceed to replace it quickly in order to b…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos