Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of the Fiat Doblò?

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Tail light

Removing the rear light of the Fiat Doblò is a very simple operation. Let's see how to proceed in this tutorial. First, open the tailgate and locate the two fixing bolts of the light, positioned between the seal and the light itself. Once done, go inside and remove the upper speaker cover using a screwdriver or a special tool for removing inserts. Once the cover is removed, locate the rear fixing bolt, undo it, and extract the light, finally disconnecting the connector.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light of a Fiat Doblò
How to Remove the Rear Light of a Fiat Doblò
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) This brief video guide shows you how to remove the rear light of a first-generation Fiat Doblò, produced from 2000 to 2009. First, open the boot of t…
Remove a Rear Light from a Fiat Doblo
Remove a Rear Light from a Fiat Doblo
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Remove a rear light from a Fiat Doblo. In this video, see how to take it off and replace the damaged bulbs. Open the boot lid, and using a screwdrive…
How to Replace the Rear Light Bulbs on a Fiat Doblo?
How to Replace the Rear Light Bulbs on a Fiat Doblo?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this tutorial, see how to replace the rear light bulbs on a Fiat Doblo, a very simple and quick operation. First, ensure that the key is not inser…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos