Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Shock Absorber on the Fiat Doblò?

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Shocks

To replace the rear shock absorber on the Fiat Doblò, lift the vehicle so you can loosen the bolts securing the rear wheel to its housing. Once the wheel is removed, you will have access to the components at the rear, particularly the bolts securing the shock absorber at both the bottom and the top. This will allow the part to be completely removed from its housing and replaced with a new one, then refit the corresponding wheel that was removed earlier.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Shock Absorber on Fiat Doblò
Replacing Rear Shock Absorber on Fiat Doblò
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In this video tutorial, you will learn how to replace the rear shock absorber on a first-generation Fiat Doblò. First, lift the vehicle from the rear…
How to Replace the Shock Absorber on a Fiat Doblo
How to Replace the Shock Absorber on a Fiat Doblo
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Want to remove the rear shock absorber on a Fiat Doblo? Follow these steps carefully: loosen the wheel bolts with an appropriate tool (telescopic spa…
How to Remove the Rear Light of the Fiat Doblò?
How to Remove the Rear Light of the Fiat Doblò?
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Removing the rear light of the Fiat Doblò is a very simple operation. Let's see how to proceed in this tutorial. First, open the tailgate and locate …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos