Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : Bearing

Fiat Doblo - Bearing

Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How to remove the rear wheel bearing on Fiat Doblo
Let's see in this video how to remove the rear wheel bearing on Fiat Doblo. We place our car on a column bridge, loosen the pins with a telescopic wrench and …read all…
Posted on 19 October 2023 by ScegliAuto
Airbags (2) Shock absorbers (4) Antenna (1) Car stereo (5) Anti roll bar (1) Battery (1) Arm (1) Glow plugs (2) Bodywork (2) Control unit (1) Key (2) Timing belt (9) V-belt (1) -board computer (6) Checks and maintenance (36) Oil pan (1) Dashboard (4) Bearing (1) Brake discs (2) Headlight (5) Tail light (4) Particulate filter (1) Air filter (6) Cabin air filter (8) Diesel filter (5) Oil filter (2) Clutch (3) Injectors (2) Headlight bulb (2) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (2) Mask (1) Window motor (1) Starter motor (1) Engine oil (2) Door panel (7) Front bumper (1) Brake pads (2) Pump (1) Door (1) Instrument cluster (9) Radiator (1) Wheel (4) Fuse box (20) Crankshaft RPM sensor (1) Lock (1) Outside rearview mirror (1) EGR valve (3) Interior blower (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos