Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : Dashboard

Fiat Doblo - Dashboard

Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How do you remove the central dashboard panel of the Fiat Doblò?
To remove the central panel of the Fiat Doblò dashboard, you need to use an object like a screwdriver to pry and detach the trim that surrounds the entire …read all…
Posted on 3 September 2023 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
How do you remove the central dashboard panel of the Fiat Doblò?
To be able to remove the central panel of the dashboard of the Fiat Doblò you must first remove the radio, unscrewing the four screws that fix it to its …read all…
Posted on 4 December 2022 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
How to remove the dashboard of the Fiat Doblò?
Removing the central dashboard in the Fiat Doblò is a very simple operation, let's see how to proceed in this tutorial. First of all, the car radio must be …read all…
Posted on 31 July 2022 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
Disassembly of Fiat Doblò center console
In this video tutorial we will see the main instructions to be able to disassemble the center console on a Fiat Doblò. First we get inside the car and go to …read all…
Posted on 7 January 2024 by ScegliAuto
Airbags (2) Shock absorbers (4) Antenna (1) Car stereo (5) Anti roll bar (1) Battery (1) Arm (1) Glow plugs (2) Bodywork (2) Control unit (1) Key (2) Timing belt (9) V-belt (1) -board computer (6) Checks and maintenance (36) Oil pan (1) Dashboard (4) Bearing (1) Brake discs (2) Headlight (5) Tail light (4) Particulate filter (1) Air filter (6) Cabin air filter (8) Diesel filter (5) Oil filter (2) Clutch (3) Injectors (2) Headlight bulb (2) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (2) Mask (1) Window motor (1) Starter motor (1) Engine oil (2) Door panel (7) Front bumper (1) Brake pads (2) Pump (1) Door (1) Instrument cluster (9) Radiator (1) Wheel (4) Fuse box (20) Crankshaft RPM sensor (1) Lock (1) Outside rearview mirror (1) EGR valve (3) Interior blower (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos