Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Centre Console on Fiat Doblò

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Dashboard

In this video tutorial, learn the main instructions for removing the centre console on a Fiat Doblò. First, get inside the car and remove the gear lever gaiter by unclipping it from the sides; then unscrew the screws located underneath and remove the plastic panel from under the steering wheel. At this point, remove the side plastics of the centre console and pull out the air vents, as shown in the video; finally, remove the console panel and disconnect all the electrical connectors located at the back.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Fiat Doblo
How to Remove the Radio from a Fiat Doblo
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Before starting, sit in the driver's seat of your Fiat Doblo. Begin by inserting the extraction keys into the holes on the front of the radio to rele…
Guide to Replacing the Timing Chain of the Fiat Doblò 1.3 Multijet
Guide to Replacing the Timing Chain of the Fiat Doblò 1.3 Multijet
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today's main steps will show you how to disassemble and replace the timing chain of the Fiat Doblò, following the instructions below. First, open the…
Removing the Steering Wheel from the Fiat Doblò
Removing the Steering Wheel from the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this brief and simple guide, learn how to remove and replace the steering wheel and its airbag on the Fiat Doblò by following the instructions bel…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos