Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : -board computer

Fiat Doblo - -board computer

Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How to reset the engine malfunction light on the Fiat Doblo
Today we will explain how to reset the engine malfunction light of the Fiat Doblo. When you want to reset the light, you must turn on the instrument panel and …read all…
Posted on 4 May 2024 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How to set the time on Fiat Doblò
To adjust the dashboard clock on the Fiat Doblò, proceed as follows: with the ignition on and the engine off, use the "MENU" button located on the …read all…
Posted on 26 April 2023 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
How to perform a service reset on Fiat Doblo
In this video tutorial you can see how it is possible to reset the service warning light on Fiat Doblò in complete autonomy, without necessarily requiring the …read all…
Posted on 19 September 2022 by ScegliAuto
Fiat Doblo (2000-2009 / Doblo1, MK 1, 223)
How to reset the oil warning light on Fiat Doblo
In this video tutorial we can see how to reset the engine oil change light on Fiat Doblo, following a few simple steps that will guide you towards the correct …read all…
Posted on 10 November 2022 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How to reset the Fiat Doblò service
In today's video we will see how to reset the Fiat Doblò service. First let's get into the middle. Let's turn it off, put it in neutral and put the handbrake …read all…
Posted on 2 May 2024 by ScegliAuto
Fiat Doblo (2009-2021 / Doblo2, 263, MK 2)
How to reset the Fiat Doblo maintenance warning light
If you want to reset the maintenance warning light on your Fiat Doblo without intervening directly on the vehicle, all you have to do is follow the following …read all…
Posted on 8 April 2024 by ScegliAuto
Airbags (2) Shock absorbers (4) Antenna (1) Car stereo (5) Anti roll bar (1) Battery (1) Arm (1) Glow plugs (2) Bodywork (2) Control unit (1) Key (2) Timing belt (9) V-belt (1) -board computer (6) Checks and maintenance (36) Oil pan (1) Dashboard (4) Bearing (1) Brake discs (2) Headlight (5) Tail light (4) Particulate filter (1) Air filter (6) Cabin air filter (8) Diesel filter (5) Oil filter (2) Clutch (3) Injectors (2) Headlight bulb (2) Rear light bulb (3) Interior lights ceiling light bulb (2) Dashboard light (1) Handle (2) Mask (1) Window motor (1) Starter motor (1) Engine oil (2) Door panel (7) Front bumper (1) Brake pads (2) Pump (1) Door (1) Instrument cluster (9) Radiator (1) Wheel (4) Fuse box (20) Crankshaft RPM sensor (1) Lock (1) Outside rearview mirror (1) EGR valve (3) Interior blower (1) Steering wheel (6)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos