Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : Anti-roll bar

Fiat Doblo - Anti-roll bar

Anti-roll Bar Fiat Doblo (2009-2021 / 263, doblo 2, mk 2)

Fiat Doblo (2009-2021 / 263, Doblo2, MK 2)
How to Replace the Longitudinal Bars on the Fiat Doblo
To perform this operation, first remove the wheel on which you will carry out the replacement. Then, lift your vehicle and place it on suitable axle stands. …Read all…
Posted on 11 March 2026 by ScegliAuto
Airbag (3) Speaker (1) Shocks (4) Antenna (1) Car stereo (8) Anti-roll bar (1) Battery (1) Control arm (1) Spark plugs (1) Glow plugs (3) Body (2) Control unit (1) Key (5) Timing belt (13) V-belt (1) Onboard computer (1) Checks and maintenance (11) Dashboard (7) Bearing (1) Brake rotors (2) Headlight (7) Tail light (4) Diesel particulate filter (2) Air filter (6) Cabin air filter (8) Diesel fuel filter (5) Oil filter (2) Clutch (3) Fuel injectors (2) Side marker bulb (2) Headlight bulb (3) Tail light bulb (4) Interior dome light bulb (2) Instrument panel light (2) Handle (3) Trim cover (1) Power window motor (1) Starter motor (3) Engine oil (6) Clock (23) Door trim panel (8) Front bumper (2) Brake pads (2) Pump (1) Car door (2) Instrument cluster (1) Radiator (1) Wheel (5) Fuse box (29) Crankshaft position sensor (1) Door lock (1) Side mirror (3) Warning light – error code (16) (6) Service warning light (58) Windshield wipers (1) EGR valve (3) Blower motor (1) Side window (1) Steering wheel (9)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos