Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel Bearing on a Fiat Doblo

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Bearing

See other generations:
Video tutorial

In this video, see how to remove the rear wheel bearing on a Fiat Doblo. Position the car on a column lift, loosen the bolts with a telescopic spanner, and raise it to a comfortable height for work.

Unscrew the bolts and remove the wheel, then start unscrewing the bolts of the caliper support and detach it. Unscrew the bolts of the brake disc and detach it from the wheel hub, then, using pliers or a screwdriver, pull off the central hub cap. Loosen the large bolt with a socket wrench and remove the piece.

Remove the wheel hub from the car with the upper bolt and pull out the bearing.

Install the new bearing onto the wheel hub and reassemble all other parts in reverse order.


Updated on 2 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shock Absorber on the Fiat Doblò?
How to Replace the Rear Shock Absorber on the Fiat Doblò?
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) To replace the rear shock absorber on the Fiat Doblò, lift the vehicle so you can loosen the bolts securing the rear wheel to its housing. Once the w…
How to Remove the Rear Light of the Fiat Doblò?
How to Remove the Rear Light of the Fiat Doblò?
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Removing the rear light of the Fiat Doblò is a very simple operation. Let's see how to proceed in this tutorial. First, open the tailgate and locate …
Guide to Replacing the Wheel with the Spare on a Fiat Doblò
Guide to Replacing the Wheel with the Spare on a Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Below are the instructions for removing and replacing the wheel with the spare on a Fiat Doblò. First, open the rear tailgate and start by extracting…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos