Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the EGR Valve in the Fiat Doblò 1.3 MultiJet?

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: EGR valve

In this video, you can see where the EGR valve is located in the Fiat Doblò and how to proceed if you need to remove it, for example, for a thorough cleaning. As shown, it is located about halfway up the left side of the engine, which is to your right when looking at the vehicle from the front. To access it, first remove the engine cover and then the battery along with its support. To do this, make sure to disconnect the negative terminal first. Once you have access to the valve, you can disconnect the recirculation pipe and unscrew the respective mounting bolts.

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the EGR Valve from a Fiat Doblò
Removing the EGR Valve from a Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today's guide will show you how to remove and replace the EGR valve on a Fiat Doblò in simple and quick steps. First, open the bonnet and locate the …
How to Remove the EGR Valve on the Fiat Doblo MK1
How to Remove the EGR Valve on the Fiat Doblo MK1
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) This video provides instructions for removing the EGR valve for replacement or cleaning on the first series Fiat Doblo with a 1.9 JTD engine. First, …
Replacing the Auxiliary Belt on a Fiat Doblò 1.3 MultiJet
Replacing the Auxiliary Belt on a Fiat Doblò 1.3 MultiJet
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In this video tutorial, you will learn how to remove and replace the auxiliary belt on a Fiat Doblò 1.3 MultiJet. First, lift the vehicle and remove …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos