Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve on the Fiat Doblo MK1

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: EGR valve

This video provides instructions for removing the EGR valve for replacement or cleaning on the first series Fiat Doblo with a 1.9 JTD engine. First, open the bonnet and remove the engine cover; then detach the EGR valve duct, also disconnecting the electrical connector of the sensor. Next, remove the actual valve by unscrewing the fastening nuts; then clean it with a suitable degreaser or opt for direct replacement!

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the EGR Valve from a Fiat Doblò
Removing the EGR Valve from a Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today's guide will show you how to remove and replace the EGR valve on a Fiat Doblò in simple and quick steps. First, open the bonnet and locate the …
Where is the EGR Valve in the Fiat Doblò 1.3 MultiJet?
Where is the EGR Valve in the Fiat Doblò 1.3 MultiJet?
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In this video, you can see where the EGR valve is located in the Fiat Doblò and how to proceed if you need to remove it, for example, for a thorough …
Replacing the Cabin Fan Resistor on the Fiat Doblò
Replacing the Cabin Fan Resistor on the Fiat Doblò
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) In today's video tutorial, you will find instructions on how to remove and replace the cabin fan resistor on the Fiat Doblò. First, get inside the ve…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos