Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Doblo
    4. : Disassembly of the EGR valve of the Fiat Doblò

Fiat Doblo - Video tutorial

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: EGR valve
Operation: Disassembly of the EGR valve of the Fiat Doblò

Today's guide will show us how to disassemble and replace the EGR valve of the Fiat Doblò, in simple and quick steps. First, we open the engine hood and begin to locate the EGR valve, located on the back of the engine block. Then, we unscrew the fastening screws of the EGR valve manifold, in order to remove it, as shown in the video. At this point, we unscrew the additional screws of the EGR valve, removing it as well. Then, we clean the valve with suitable products or replace it if damaged, following the video tutorial until the end!


Posted on 15 September 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Doblo 2009-2021 - Where is the EGR valve of the Fiat Doblò 2011? Read Answer

How to reset the service in the Opel Antara?

As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly.

Watch the video!


by ScegliAuto

More videos