Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Doblo
  6. : Change to Fiat Doblo battery

Fiat Doblo - Video tutorial

Model: Fiat Doblo 223, MK 1, Doblo 1 - Years 2000-2009
Part: Battery
Operation: Change to Fiat Doblo battery

Is the power supply battery of the Fiat Doblo to be replaced? Let's see how it disassembles. We open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, releasing the lock lever with your fingers. Once the engine compartment is open, remove the cover to access the battery removal. Disassemble the locking pins of the battery terminals, then, remove it from the engine compartment and replace it with a new one (same voltage). We close the bonnet at the end of the maintenance. We turn on the engine to see the starter motor if it gives the cue to leave.


Posted on 4 December 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos