Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the starter motor of the Fiat Doblò

Model: Fiat Doblo Doblo 1, MK 1, 223 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Starter motor

See other generations:
Video tutorial

In this guide, we will see the disassembly and replacement instructions for the starter motor of the Fiat Doblò. First, lift the vehicle and locate the starter motor, located on the lower part (next to the oil sump); then disconnect the electrical wiring and unscrew the fixing nuts, using a socket wrench, as shown in the video.

At this point, remove and replace the starter motor with the new original one (or repair it if possible), making the connection and checking the correct engine ignition!


Posted on 27 July 2025 by ScegliAuto


Related tutorials

Replacing the Starter Motor on a Fiat Doblo
Replacing the Starter Motor on a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) This video shows the entire process required to replace the starter motor on a Fiat Doblo, first generation model produced from 2000 to 2009 with a 1…
Replacing the Starter Motor on a Fiat Doblo
Replacing the Starter Motor on a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Need to replace the broken starter motor on your Fiat Doblo? Here’s how to remove it. Open the front bonnet, remove the battery (use a socket wrench …
Where to Find and How to Access the Radio Fuse of a Fiat Doblo
Where to Find and How to Access the Radio Fuse of a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) The radio fuse for your Fiat Doblo is located inside the fuse box. The fuse box is situated on the lower left side of the steering column. To access …

    Frequently Asked Questions

    • Doblo 2000-2009 - Where is the starter motor of the Fiat Doblò located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos