Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of the Fiat Doblò 2

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Car door

In the following guide, we will explain step by step how to correctly and safely remove the door panel of your second series Fiat Doblò. First of all, remember to completely turn off the vehicle, then open the door that needs the panel removed and proceed with the removal of the control panel. Once you have done that, use a Torx key to unscrew all the various screws located along the perimeter of the door panel, then pull the panel towards you until it is completely removed. At this point, the procedure is successfully completed.

Posted on 3 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a Fiat Doblò
How to Remove the Door Panel of a Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Before you begin, open the front door of your Fiat Doblò. Start by unscrewing and removing the screws that secure the door panel to the door itself. …
Replacing the Window Regulator on Fiat Doblo
Replacing the Window Regulator on Fiat Doblo
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Do you want to replace the window regulator and glass on a Fiat Doblo? Start by removing the door panel to access the glass. Unscrew the securing scr…
How to disassemble the front door panel of the Fiat Doblò
How to disassemble the front door panel of the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today's instructions will show us how to disassemble and remove the front door panel of the Fiat Doblò. First, we open the front door of the vehicle …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos