Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Timing Belt from a Fiat Doblò 1.6 CNG

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Timing belt

In this video, you will learn how to remove the timing belt from a Fiat Doblò 1.6 CNG. To begin, ensure you have all the necessary tools as indicated in the video. Next, start by removing the left front wheel. Once you reach the timing system, loosen the tensioner as shown in the video and slide off the timing belt. Use a wire brush to clean the tensioner tracks to remove any residue from the old belt. Now, position the new belt on the two tensioners and begin tightening until the correct tension is achieved.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing the Timing Belt on a Fiat Doblo 1.6 MultiJet
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Today, in this brief guide, you will find the main instructions for removing and replacing the timing belt on a second series Fiat Doblo with a 1.6 M…
How to replace the timing belt of the Fiat Doblò 1.4
How to replace the timing belt of the Fiat Doblò 1.4
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Below we will discover the instructions that will allow us to disassemble and replace the timing belt of the Fiat Doblò 1.4. First, we open the hood …
Guide to replacing the timing belt of the Fiat Doblò 1.6 MultiJet
Guide to replacing the timing belt of the Fiat Doblò 1.6 MultiJet
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Below we will see the main instructions on how to disassemble and replace the timing belt of the Fiat Doblò 1.6 MultiJet. First, we open the hood of …

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2000-2009 - How soon to replace the timing belt on the Fiat Doblo Cargo? Read answer
    • Doblo 2009-2021 - How many km do you change the timing belt of the Fiat Doblo? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos