Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Chain of the Fiat Doblò 1.3 Multijet

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Timing belt

See other generations:
Video tutorial

Today's main steps will show you how to disassemble and replace the timing chain of the Fiat Doblò, following the instructions below. First, open the bonnet and start by removing the upper cover, then disassemble the engine mount; next, remove the crankshaft pulley and disconnect the trapezoidal belt.

At this point, remove the timing chain, taking the necessary references; install the new original timing chain, ensuring it is timed correctly, and reassemble all components!


Updated on 14 September 2026 by ScegliAuto


Related tutorials

How to Replace the Timing Chain on a Fiat Doblò 1.3 MultiJet?
How to Replace the Timing Chain on a Fiat Doblò 1.3 MultiJet?
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) To replace the timing chain on a Fiat Doblò 1.3 MultiJet, open the bonnet to access the engine bay. You will need to remove the cover on the side of …
Guide to replacing the timing belt of the Fiat Doblò 1.6 MultiJet
Guide to replacing the timing belt of the Fiat Doblò 1.6 MultiJet
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Below we will see the main instructions on how to disassemble and replace the timing belt of the Fiat Doblò 1.6 MultiJet. First, we open the hood of …
Instructions for Replacing the Timing Belt on a Fiat Doblo 1.6 MultiJet
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) Today, in this brief guide, you will find the main instructions for removing and replacing the timing belt on a second series Fiat Doblo with a 1.6 M…

    Frequently Asked Questions

    • Doblo 2000-2009 - How soon to replace the timing belt on the Fiat Doblo Cargo? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos