Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter on a Fiat Doblò

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Air filter

See other generations:
Video tutorial

Lift the bonnet and secure it. Replacing the engine air filter on an Opel Combo or Fiat Doblò is really a simple and straightforward task. Unscrew the three 7 mm bolts that secure the air filter box cover and remove it. Take out the filter and you're done.

Since you're at it and given the speed of the operation, take the opportunity to clean the filter box by removing debris with an air compressor, then insert the new filter you purchased and refit the cover by securing the three 7 mm bolts. As mentioned, it's a piece of cake!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter of a Fiat Doblo
How to Remove the Air Filter of a Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) How to replace the engine air filter on a Fiat Doblo? In this video, see how to proceed with the replacement. Open the car door, pull up the bonnet r…
How to Replace the Air Filter on a Fiat Doblo
How to Replace the Air Filter on a Fiat Doblo
Fiat Doblo (2000-2009 / Doblo 1, MK 1, 223) Before you start, open the bonnet of your Fiat Doblo. Begin by unscrewing and removing the screws that secure the air filter cover. Next, unclip and …
How to Replace the Engine Air Filter on Fiat Doblo
How to Replace the Engine Air Filter on Fiat Doblo
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) How do you replace the engine air filter on a Fiat Doblo? Follow these steps: Open the car door, pull up the engine compartment release lever located…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos