Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to do when the brake pads squeak, even when they are new.

Model: (Various brands) Various
Part: Brake system

The squeaking of brakes - even when new - is a common issue and can depend on several factors: the first is the material of the brake pads; metallic or sintered pads are harder and tend to create squeaks against the disc. It’s better to use ceramic or semi-metallic pads. A second reason could be the lack of installation of anti-noise shims, which are also paired with a special anti-noise paste. Another reason could be worn brake discs, or rusty caliper guides caused by overly gentle driving or infrequent use of the vehicle. The wear shown by the YouTuber in the video should not be underestimated either.

Posted on 17 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Brake Pads on the HD Sportster Iron
How to Change the Front Brake Pads on the HD Sportster Iron
(Various brands) Various To replace the front brake pads on this motorcycle, follow the instructions in this description and refer to the video. First, loosen the bolts secur…
How to Replace the Brake Pads on a Scooter
How to Replace the Brake Pads on a Scooter
(Various brands) Various If you intend to replace the brake pads on your scooter yourself, you can find the instructions in the description below and refer to the video. Firs…
Signs That Indicate It's Time to Change the Brake Pads
Signs That Indicate It's Time to Change the Brake Pads
(Various brands) Various Here are the signs to consider that indicate it's time to change the brake pads: when you hear a squeal caused by metal rubbing, produced by the meta…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos