Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Brake Pads on the HD Sportster Iron

Model: (Various brands) Various
Part: Brake pads

Video tutorial

To replace the front brake pads on this motorcycle, follow the instructions in this description and refer to the video. First, loosen the bolts securing the caliper assembly.

Then, use an Allen key to remove the retaining bolt for the pads, allowing you to extract the two pads and retrieve the metal plates needed to fit the new pads. Take the new pads and install them, then refit the caliper assembly, and you're done.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Signs That Indicate It's Time to Change the Brake Pads
Signs That Indicate It's Time to Change the Brake Pads
(Various brands) Various Here are the signs to consider that indicate it's time to change the brake pads: when you hear a squeal caused by metal rubbing, produced by the meta…
How to Replace the Front Brake Pads on a Scooter
How to Replace the Front Brake Pads on a Scooter
(Various brands) Various If you want to replace the rear brake pads on your scooter, the description below outlines the necessary steps for correctly carrying out the replace…
How to Replace the Brake Pads on a Scooter
How to Replace the Brake Pads on a Scooter
(Various brands) Various If you intend to replace the brake pads on your scooter yourself, you can find the instructions in the description below and refer to the video. Firs…

    Frequently Asked Questions

    • Vari - How much does it cost to replace the brake pads on my car? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos