Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Brake Pads on a Scooter

Model: (Various brands) Various
Part: Brake pads

If you intend to replace the brake pads on your scooter yourself, you can find the instructions in the description below and refer to the video. First, obtain a socket wrench to remove the bolts securing the brake caliper to the casing. Once the caliper is removed from the disc, take out the pin holding the pads in place by first removing the washer. At this point, you can slide out the pads and proceed with their replacement. Refit the caliper onto the disc and secure it back to the casing.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various If you want to replace the rear brake pads on your scooter, the description below outlines the necessary steps for correctly carrying out the replace…
(Various brands) Various Here are the signs to consider that indicate it's time to change the brake pads: when you hear a squeal caused by metal rubbing, produced by the meta…
(Various brands) Various To replace the front brake pads on this motorcycle, follow the instructions in this description and refer to the video. First, loosen the bolts secur…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos