Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

The symptoms of a faulty driveshaft.

Model: (Various brands) Various
Part: Axle shaft

This video lists the main symptoms of a deteriorated half-shaft (or CV joint). The most common is the "clicking" noise when turning, especially when the steering wheel is fully turned (like in a parking lot). The side of the noise indicates which half-shaft is damaged. If we feel strong vibrations coming from the floor or the steering wheel, especially when accelerating, then this is another symptom. If we also hear a clunk during acceleration or deceleration, this is a symptom related to the half-shaft. If grease is leaking onto the wheel or under the car, it means that the boot protecting the joint is breaking, causing the lubricating grease to leak out, which will splatter onto the wheel, suspension arm, or ground. Once the grease is out, the joint is very vulnerable. In the most severe cases, with the joint destroyed, we might experience a loss of power to the affected wheel, enough to prevent the car from moving, and hear a loud noise of grinding metals.

Posted on 15 January 2026 by ScegliAuto

Video tutorial

Related tutorials

What are the symptoms to identify faults in the ignition coil?
What are the symptoms to identify faults in the ignition coil?
(Various brands) Various In this video we show the symptoms that indicate when the ignition coils of our car are faulty. First of all, it presents ignition problems, and cons…
The symptoms of a strained or injured tendon
The symptoms of a strained or injured tendon
(Various brands) Various In this video we will learn about the four main symptoms of a faulty timing belt tensioner, in order to diagnose if it is time to replace it. The sym…
What are the symptoms of a faulty alternator?
(Various brands) Various What are the symptoms that we should be able to recognize in our car, which give us an indication of a faulty alternator? It is important to be able …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos