Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove a Stuck Injector

Model: (Various brands) Various
Part: Fuel injectors

Video tutorial

Removing a stuck injector can be a challenging task as it may bond to the engine due to heat. Clean the area using penetrating oil and let it sit for about 30 minutes.

Start the engine as the heat will expand the metals, allowing for gradual rotation. Then insert the adapter into the injector and use an injector puller.

Apply progressive upward taps until the injector is removed from its seat. It is crucial not to use a hammer and screwdriver for removal in case of a blockage; it is advisable to consult a workshop or purchase the extractor from auto parts websites.


Posted on 6 March 2026 by ScegliAuto


Related tutorials

(Various brands) Various To replace the LPG injectors, first disconnect the electrical connector from each injector by pulling upwards on the locking mechanism and then remov…
(Various brands) Various To test the AdBlue injector, you will need a 5/10 Volt power supply, connection cables, a rubber tube, and a multimeter. You can perform a bench test…
(Various brands) Various In this video, we learn something very useful: how to clean our fuel injectors. You will need a solvent, such as white spirit, an air compressor or a…

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos