Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace LPG Injectors

Model: (Various brands) Various
Part: Fuel injectors

To replace the LPG injectors, first disconnect the electrical connector from each injector by pulling upwards on the locking mechanism and then removing the connector from its seat. Next, take two 10 mm spanners and undo the nut securing the pipe connected to each injector. Then, also undo the nut that secures the injector itself, which can now be removed. Replace the gasket with a new one, even if the old one appears to be fine, and then insert the new injector. Refit the nuts and reconnect the pipe and the electrical connector.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Clean the LPG Injectors on a Car
How to Clean the LPG Injectors on a Car
(Various brands) Various If you need to maintain and clean the LPG injectors on your car, follow the instructions below and refer to the video images for assistance. First, o…
When should the LPG filters be changed on a vehicle with the Landi Renzo system?
When should the LPG filters be changed on a vehicle with the Landi Renzo system?
(Various brands) Various What is the frequency at which the LPG filters need to be changed on a vehicle equipped with a Landi Renzo LPG system? These systems have two filters…
How to replace the injectors of a Landi Renzo LPG system
How to replace the injectors of a Landi Renzo LPG system
(Various brands) Various We can see in this video how to replace the LPG injectors of a Landi Renzo LPG system, installed as standard on a Fiat group vehicle. On this brand, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos