Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove a 100 Amp Fuse

Model: (Various brands) Various
Part: Fuse box

Replacing a 100 Amp fuse is a very risky operation: it is a power fuse that protects important circuits, so before proceeding, ensure the engine is off, remove the key from the ignition, and make sure all electrical consumers are turned off. Completely disconnect the battery (both the negative and positive terminals). A 100 Amp fuse is not found in the mini fuse box but in the engine bay, among the main fuses, and is usually a 'blade' type and of 'maxi' or 'mega' size. It typically has a transparent window on top: if the metal strip inside is melted or burnt, the fuse needs replacing. If it does not come out, check for a locking mechanism. Replace it with an identical one, of the same type and amperage: never replace it with one of higher amperage, as this is extremely dangerous and can cause a fire: never repair such a fuse with aluminium wires or anything else! If the new fuse blows immediately, it indicates a serious fault in the circuit. In this case, the problem requires diagnosis by a professional.

Posted on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various The description is based on ISO 8820 standards, which are used by modern cars. Brown identifies 5 Amps: position lights (rear), dashboard, parking se…
(Various brands) Various On car batteries, two symbols appear: A (ampere) and Ah (ampere-hour). The ampere is the unit of measurement for electric current, indicating the amo…
(Various brands) Various The MAN TG X places the fuse for the cigarette lighter socket inside the cabin. The fuse box is indeed located inside the cabin, specifically behind …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where to find the fuses of the Yamaha T-max 530 DX? Read answer
    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos