Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Boot Struts on Your Car

Model: (Various brands) Various
Part: Hydraulic pistons

Are the struts on your car's boot damaged? Follow this guide to replace the boot struts effectively. Lift the boot and secure it (use supports to hold the boot), then use a screwdriver to remove the securing clips located at both ends of the strut. Detach the damaged strut and install the new part in the two slots on opposite sides. Secure the strut with the metal clips. Repeat the same process for the removal/installation of the other strut.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Replace the gas struts that hold up the tailgate of your car. Here's how to remove them. Lift the tailgate and secure it with a prop rod (as you need…
(Various brands) Various To replace the tailgate struts, first open the tailgate and secure it in the raised position using a support. Next, unclip the retaining ring that co…
(Various brands) Various Today, replace the boot struts, a procedure used on many cars from various manufacturers. To replace the struts, remove the plastic covers near the f…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos