Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Hydraulic Struts of the Boot

Model: (Various brands) Various
Part: Hydraulic pistons

The first step after opening the boot is to secure it in an elevated position to work safely. You can then start unscrewing the bolts that secure the struts to the body of your vehicle and to the boot. Repeat this operation on both sides of the boot, being careful not to release the boot at any time. Now, test the new struts, and retrace the steps described for refitting the various components removed.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Are the struts on your car's boot damaged? Follow this guide to replace the boot struts effectively. Lift the boot and secure it (use supports to hol…
(Various brands) Various Today, replace the boot struts, a procedure used on many cars from various manufacturers. To replace the struts, remove the plastic covers near the f…
(Various brands) Various In this video, see how to remove and replace the gas struts on the boot, a very simple and quick operation valid for any car model that is equipped w…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos