Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Gas Struts on the Boot?

Model: (Various brands) Various
Part: Hydraulic pistons

In this video, see how to remove and replace the gas struts on the boot, a very simple and quick operation valid for any car model that is equipped with them. After obtaining a long rod to support the boot, or assistance from another person, apply some penetrating spray to the joints of the strut and, using a small flat screwdriver, lift the metal clips as shown in the video. At this point, pull the joints and disengage them from the bodywork, then fit the replacement part following the same procedure.

Updated on 8 May 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various To replace the tailgate struts, first open the tailgate and secure it in the raised position using a support. Next, unclip the retaining ring that co…
(Various brands) Various Replace the gas struts that hold up the tailgate of your car. Here's how to remove them. Lift the tailgate and secure it with a prop rod (as you need…
(Various brands) Various The first step after opening the boot is to secure it in an elevated position to work safely. You can then start unscrewing the bolts that secure the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos