Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tailgate Struts?

Model: (Various brands) Various
Part: Checks and maintenance

To replace the tailgate struts, first open the tailgate and secure it in the raised position using a support. Next, unclip the retaining ring that connects the gas support strut to the tailgate using a flathead screwdriver. After removing the retaining ring, unclip the support strut and then clean the mounting seats for the new struts with WD-40 spray. At this point, you can insert the new gas support struts, snapping the retaining ring that connects the support strut to the bodywork and the tailgate. Once the operation is complete, you can close the boot.

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Tailgate Gas Struts
(Various brands) Various Replace the gas struts that hold up the tailgate of your car. Here's how to remove them. Lift the tailgate and secure it with a prop rod (as you need…
How to Replace the Boot Struts
How to Replace the Boot Struts
(Various brands) Various Today, replace the boot struts, a procedure used on many cars from various manufacturers. To replace the struts, remove the plastic covers near the f…
How to Replace the Hydraulic Struts of the Boot
How to Replace the Hydraulic Struts of the Boot
(Various brands) Various The first step after opening the boot is to secure it in an elevated position to work safely. You can then start unscrewing the bolts that secure the…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos