Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to replace the pistons in the trunk

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Hydraulic pistons
Operation: How to replace the pistons in the trunk

Today we see how to replace the boot pistons, this procedure is used on many cars of different car manufacturers. To replace the pistons it is necessary to remove the plastic protections close to the fixing screws. To do this, just insert a screwdriver into the appropriate slot and pry, being careful not to get hurt. Support the tailgate or get help, and forcefully remove the piston from the retaining pin. The piston is simply wedged into a hemisphere. Remove it on both sides. Secure the new piston by simply fitting the two ends into the hemisphere. Put the clips and protectors back on both under and at the top. Test the perfect functioning by closing the tailgate.


Posted on 29 May 2024 by ScegliAuto



How to replace the pistons of the tailgate
(Various brands) Various We replace the pistons that hold the tailgate of our car. Let's see how they disassemble. We lift the hatch and put it in safety with a rod (since we
How to replace the hydraulic pistons of the tailgate
(Various brands) Various The first operation after opening the tailgate will obviously be to have the tailgate kept up in some way, so as to be able to carry out the work in
How do you replace the tailgate pistons?
(Various brands) Various To replace the tailgate pistons, you must first open it and secure it in the raised position using a support. Then you have to release the snap ring

    Frequently Asked Questions

    • Vari - How to disassemble the tailgate hydraulic piston? Read Answer
    • Vari - How to repair the hydraulic pistons of the tailgate? Read Answer
    • Vari - How to replace the tailgate pistons? Read Answer
    • Vari - How much does it cost to change the boot pistons? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos