Do it yourself
Frequently asked questions about cars and motorcycles

What to Do If Your Vehicle Is Not Chainable?

Model: (Various brands) Various
Part: Snow chains

What should you do if your car is declared "not chainable" by the manufacturer? Many modern vehicles have this limitation due to the large number of sensors in the wheels. However, you can still fit chains: Check the side clearance by inserting your fingers between the tyre sidewall and the suspension. If there is one finger (2 cm), then there is space for the chain. Perform a check with the steering turned fully left and check the space between the tyre, shock absorber, and wishbone/suspension. Again, in the video, there is just enough space. Check the opposite side as well (in the video, there is more space here). Ensure that the chain, once fitted, does not rub against the wheel arch when compressed. The conditions for "informed risk" are that they are only fitted in emergencies and that you accept the risk, and above all, you must have completed the checks described above.

Posted on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various This video explains how your vehicle warns you in every possible way about the correct fuel type: it is written on the dial of some brands, and most …
(Various brands) Various What to do if the glove compartment of our car cannot close properly? The first thing to do is definitely not to fill it too much, it is not a drawer…
(Various brands) Various From this video, we can take note of some tips for using our car's air conditioner to its fullest potential. If the car has been sitting in the sun f…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos