Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to do if the seat belts do not retract

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

Let's see how to fix the issue of seat belts that do not retract or retract slowly, as shown in the video. There is no need to disassemble anything.

Simply use silicone spray (not engine oil or grease, which can stain or attract dirt). Fully extend the seat belt, spray the product generously on the belt, particularly on the part that goes towards the internal mechanism.

There is no need to worry, as silicone oil will not stain your clothes. Allow it to work for a few minutes so that the lubricant flows along the belt and reaches the retraction mechanism at the bottom.

The problem should be resolved. If necessary, repeat the operation.


Posted on 21 October 2026 by ScegliAuto


Related tutorials

What to Do When the Seatbelts No Longer Retract
What to Do When the Seatbelts No Longer Retract
(Various brands) Various The problem described in the video is that of an older car where the seatbelts no longer retract properly. The reason is simply the accumulation of d…
Replacing Seatbelts
Replacing Seatbelts
(Various brands) Various How do you remove the car seatbelts? Let's look at the disassembly of the components to replace the seatbelts. Use a plastic lever to remove the uppe…
How to improve the smoothness of seat belts with little expense
How to improve the smoothness of seat belts with little expense
(Various brands) Various In this video we can see a very simple method to always keep the seatbelt retraction of an older car smooth, where the problem often arises with seat…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer

How to Remove the Spare Wheel from a Ford Ranger

In this video, see how and where to find the spare wheel of the Ford Ranger. Behind the rear passenger seats, you will only find the kit needed to extract the wheel from its housing. Remove it by turning the safety knob, and attach the lever that will be used for this purpose. Next, take the safety key from the vehicle remote. This will be needed to unlock the latch located at the end of the load bed. Once the latch is opened, you can remove the metal square that allows access, using the bar you have attached, to the actual lock that will lower the spare wheel from its housing under the load bed. Replace the flat tyre with the spare and reverse all the steps taken so far to put everything back in place.

Watch the video!


by ScegliAuto

More videos