Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the fuel level sensor from a petrol tank

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

The video shows the removal of the fuel level sensor (fuel sending unit) from the tank, but does not specify which vehicle it is: neither the car nor the make or model is ever shown. The procedure demonstrated is simple and takes only a few seconds: position yourself under the car (with the tank emptied), locate the retaining ring with its grooves and turn it counterclockwise using a screwdriver until it releases.

Remove the ring and set it aside, then gently lift the sensor, taking care not to snag it on the edges, and finally extract the brass float. The visible clues (brass float, retaining ring) are common to many vehicles, especially older American cars, but do not allow for certain identification of the model.


Posted on 27 October 2026 by ScegliAuto


Related tutorials

How much fuel is advisable to keep in the tank of our car, due to its operation.
How much fuel is advisable to keep in the tank of our car, due to its operation.
(Various brands) Various This very interesting video clarifies many concepts regarding the fuel tank, and also how much gasoline (or diesel) it is good to keep in the tank it…
How a Fuel Pump Works
How a Fuel Pump Works
(Various brands) Various Let's see how an electric fuel pump works, like the one in the video: it has the essential task of drawing petrol (or diesel) from the tank and sendi…
How to fix the carburetor float needle blockage in the car
How to fix the carburetor float needle blockage in the car
(Various brands) Various The causes of the fuel level gauge blockage are due to a problem with the float sensor located inside the tank. The gas tank is located under the rea…

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer

How to Remove the Rear Hatch Cover of the Mercedes B-Class

In this video, you will learn how to remove the rear hatch cover of the Mercedes B-Class. You will need a small flathead screwdriver to remove the handle cover. Use long-nosed pliers to gently remove the clips inside. The next step is to carefully insert a plastic spatula into the gap created to start removing the cover; it is advisable to start from the sides and work towards the centre. Disconnect the courtesy light connector, and continue gently removing the plastics by leveraging the gaps created, always starting from the sides. Be cautious of clips and wiring, and handle everything with care.

Watch the video!


by ScegliAuto

More videos