Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Programming and Deleting Remotes on the Nice Soon 24 Motor

Model: (Various brands) Various

Video tutorial

Here we have a Nice Soon 24 motor for a sectional door with an onboard control unit (the one where the plug connects). Before starting, disconnect the plug, then insert the receiver (the piece that receives the signal) into its housing on the control unit.

Power the motor by connecting the plug, and enter learning mode by pressing and briefly releasing the button on the radio receiver. The LED on the receiver will start to flash.

Take the remote you want to program and hold down the button you wish to use. Wait for the receiver to flash three long times. Then it will turn off; done.

The remote is programmed. If you want to delete them to start over, press and hold the button on the receiver.

Count the flashes; on the third flash, release the button; the receiver will flash rapidly and briefly: this means all memory has been cleared.


Posted on 31 October 2026 by ScegliAuto


Related tutorials

How to program the Nice remote control
How to program the Nice remote control
(Various brands) Various Today we will explain how to program a gate remote control. To program a new Nice remote control, you need to use the "old" remote control. To carry …
How to Copy Remote Controls for Nice Automatic Gates
How to Copy Remote Controls for Nice Automatic Gates
(Various brands) Various To copy a Nice remote control, tilt the original remote towards the receiver during the procedure. This requires a precise angle that allows the sign…
How to Program Nice Remotes in Mode 1?
How to Program Nice Remotes in Mode 1?
(Various brands) Various With the help of the attached video tutorial, you can successfully program a Nice remote quickly and without complicated steps. Here’s what to do: ne…

    Frequently Asked Questions

    • Vari - Triangle Season X TA01 tyres: characteristics and opinions Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Open a Stuck Boot Lid on a Seat Ibiza

On a Seat Ibiza, the boot lid may become stuck, for example, due to a fault with the control button or the lock actuator. In these cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the backrest by operating the release lever. Next, go to the boot, unclip the cover panel of the boot lid, and open it by operating the actuator with a screwdriver or a similar tool.

Watch the video!


by ScegliAuto

More videos