Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Copy Remote Controls for Nice Automatic Gates

Model: (Various brands) Various
Part: Checks and maintenance

To copy a Nice remote control, tilt the original remote towards the receiver during the procedure. This requires a precise angle that allows the signal to be read correctly by the receiver during learning. The cloning via "remote copy" is used for Nice remotes that support the "copy" or "remote copy" function (FLO; ERGO; ONE; INTI series). Keep the original remote 5/10 cm away from the new remote: tilt the old remote at a 45° angle towards the new one, with the LED facing the new remote (keeping it angled). Press the button you want to clone on the old remote and hold it down, then press it on the new one: this also needs to be held down. When the LED on the new remote flashes, the copy has been successful. For the Nice OXI; RXI; RBA: open the receiver cover (near the gate motor); press the "learn" button on the receiver (a LED lights up or it emits a beep). Within 10 seconds, press the corresponding button on the new remote for 2 seconds and the LED on the receiver will turn off.

Posted on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to duplicate a Nice Era One gate remote control
How to duplicate a Nice Era One gate remote control
(Various brands) Various In this video, we see how to copy a remote control for the Nice Era One gate: the first method is by cloning from an existing remote control, like ma…
How to program the Nice remote control
How to program the Nice remote control
(Various brands) Various Today we will explain how to program a gate remote control. To program a new Nice remote control, you need to use the "old" remote control. To carry …
How to change the battery of the Nice Era - Inti gate remote control
How to change the battery of the Nice Era - Inti gate remote control
(Various brands) Various In this video we see how to change the battery of the Nice Era-inti gate remote control. This remote control allows us to open and close our electric…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos