Do it yourself
Frequently asked questions about cars and motorcycles

What to Do When the Brake Lights Don't Work

Model: (Various brands) Various
Part: Tail light

Video tutorial

Brake lights that don't work are a serious issue for you and those behind you. If the third light doesn't illuminate, then there is a problem with the entire system. If the third light does come on but the other two do not, the issue is specific to the rear lights, so the fuse and the switch under the pedal are fine.

The first thing to check is the bulbs. The rear brake lights have a specific fuse that you can check.

Another thing to inspect is the bulb holder: the metal contacts may be corroded, which you can clean with contact spray. The culprit may be the black earth wire for the rear lights, which screws to the bodywork in the boot.

If the screw is loose or rusty, the light won't illuminate.


Posted on 17 November 2026 by ScegliAuto


Related tutorials

(Various brands) Various There are several reasons why the rear lights work while the brake lights do not, or vice versa. On older cars, the brake lights and rear lights ofte…
(Various brands) Various What to do if the brake lights are not working? The most immediate thing to do is to check the dedicated fuse, consulting the user manual of our car …
(Various brands) Various The first thing to consider is whether you have forgotten to release the handbrake. If so, simply disengage it and the brake light should turn off. I…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos