Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram for Iveco Daily mk3

Model: IVECO Daily MK 3 - Years 1999-2006
Part: Fuse box

As with many other types of vehicles, the fuse box on the Iveco Daily third series is located inside the cabin on the driver's side: specifically, it is found low and to the left of the steering wheel, in the lower area relative to the air vent. The video attached shows the fuse diagram: the fuse for the windscreen wipers is, for example, number 10 rated at 15 Amps, while the one for the cigarette lighter is number 20 rated at 10 Amps. In case of an electrical fault, check the aforementioned diagram or your user manual, identify the relevant fuse, and replace it.

Updated on 15 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fuse box diagram for an Iveco Daily
IVECO Daily Through this very short video tutorial, you can see the diagram of the main fuse box for an Iveco Daily, a model produced from 2000 to 2006. The diag…
Diagram and positioning of internal fuses of the Iveco Daily
Diagram and positioning of internal fuses of the Iveco Daily
IVECO Daily (1999-2006 / MK 3) This short and simple guide will show us the information to access the internal fuse box of the Iveco Daily. First, we get on board the cabin and sta…
Diagram and positioning of the internal fuse box of the Iveco Daily
Diagram and positioning of the internal fuse box of the Iveco Daily
IVECO Daily (1999-2006 / MK 3) Today we will discover the instructions that will allow us to access the internal fuse box of the Iveco Daily. First, get inside the cabin and start …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos