Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service Light on an Iveco Daily 35c18

Model: IVECO Daily MK 4 - Years 2006-2020
Part: Service warning light

In this video, we can see how to reset the oil service light on an Iveco Daily. First, turn on the ignition and notice that the red oil light is on. At this point, turn off the instrument panel; then turn it back on while holding the accelerator pedal for 15 seconds. After this step, while keeping the accelerator pedal pressed, press the brake pedal ten times. Now you can remove the instrument panel. Once these steps are completed, start the vehicle and check the results. The service light that was previously on should now remain off.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Iveco Daily.
How to reset the service light on the Iveco Daily.
IVECO Daily (1978-1999 / MK 1) Today we will explain how to reset the service light on an Iveco Daily vehicle, model produced from 1989 to 1996. To perform the reset, we need to tu…
How to reset the service light on the 2014 Iveco Daily
How to reset the service light on the 2014 Iveco Daily
IVECO Daily (2006-2020 / MK 4) The steps to reset the service light on the 2014 Iveco Daily are simple and quick to perform independently. The steps are: -close all the vehicle's d…
How to Reset the Service Light on the Iveco Daily
How to Reset the Service Light on the Iveco Daily
IVECO Daily (2006-2020 / MK 4) After performing the mandatory service on an Iveco Daily, it is necessary to reset the maintenance light. Start by turning on the vehicle and then pr…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos