Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
In order to replace the Honda Insight swing arm it is necessary to lift the car and loosen the bolts that secure the wheel corresponding to the arm that needs to be replaced. Next, it will be necessary to remove the rivets that secure the internal cover of the wheel arch, located under the car and inside the wheel arch. At this point it will be possible to loosen all the bolts that fix the swinging arm and remove it from its housing, fixing the mechanism. The new arm can therefore be installed and fixed to the wheel by inserting the previously removed bolts.
Posted on 28 April 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |