Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit a Stand on a Motorcycle

Model: (Various brands) Various

If you need to fit a stand on a scooter, follow the instructions below, referring to the images in the video for a general idea applicable to various models. First, remove the left side fairing by unscrewing the screws on the upper part where the feet rest, and then unscrew the screws located under the floor to remove the side panel. Next, take a standard stand (aftermarket purchase), which has two brackets and corresponding bolts. Position the brackets over the pre-drilled holes under the floor and tighten the nuts at the back. At this point, reassemble the side panel and the fairing.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Centre Stand on the Aprilia Sportcity
How to Remove the Centre Stand on the Aprilia Sportcity
(Various brands) Various If you want to remove the centre stand on this motorcycle, you can follow the instructions provided in this video and also use the description below.…
How to mount the push&block stand on the scooter
(Various brands) Various The push&block stand is considered an innovation against motorcycle thefts. Its innovation allows you to park your vehicle safely, as the only way to…
How to Remove the Mirrors on a Motorcycle
(Various brands) Various In today's video, you will see how to remove the rear-view mirrors on a motorcycle to replace them with new, more efficient units that meet the owner…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Remove the Headrests from the Fiat Panda

In this guide, discover the main steps to disassemble and remove the headrests, both front and rear, from the Fiat Panda, as well as other models from the manufacturer. First, get in the vehicle and press the buttons located at the base of the headrest posts; while holding them down, pull the headrests upwards to remove them, as shown in the video. At this point, reinstall the headrest by lowering it until it clicks and adjust it to the desired height!

Watch the video!


by ScegliAuto

More videos