Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : Replacement of brake lights and indicators on Honda SH

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Rear light bulb
Operation: Replacement of brake lights and indicators on Honda SH

In this video we are going to see how to replace the rear bulbs of the Honda SH (position, stop and indicators). As regards the position / stop it is a P21 5 W, while for the arrows two 21 W amber ones. We start from the stop and as a first step we remove the luggage racks; then we are going to unscrew the plastic part of the tank as well. Now we take off the plastic frame and, after having unscrewed the two screws on the cap, we remove it and replace the burned out light. To replace the arrows, instead, unscrew the two side caps and remove the old bulbs. Let's try the bulbs and now let's proceed in reverse to reassemble everything.


Posted on 29 May 2022 by ScegliAuto

    Frequently Asked Questions

    • Vari - Are reverse lights mandatory? Read Answer
    • Vari - Why don't the brake lights work? Read Answer
    • Vari - Why won't my car's brake lights turn on? Read Answer
    • Vari - Why doesn't the reverse light work? Read Answer
    • Vari - How many reversing lights are there in a car? Read Answer
    • Vari - How many reversing lights are there? Read Answer
    • Vari - Why are the brake lights not working? Read Answer
    • Vari - How much do you spend to change the brake light bulbs? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos