Do it yourself
| ||||
|
(Various brands) Various - Video tutorial
Model: (Various brands) Various
Hi today we are going to replace the service belt on Alfa Romeo. First we go to jack up the car from the passenger side, turning the wheel outwards so that we can remove the wheel arch. Unscrew the screws that support the wheel arch and any engine cover casing. Now we identify the belt tensioner bearing and with a 16 wrench we pull towards us, in order to loosen the belt and be able to extract it. In case we don't remember the exact position of the belt we can make a drawing on paper of its original position. We ascertain that the belt to be replaced is the same as our spare, and we put it back in place checking that the writing on the outside of the belt is legible correctly from our position, and that it is not upside down. We recommend that you first put it on the upper bearings and then go down, leaving the belt tensioner free. When the belt is in place, we turn the belt tensioner with the key and put it in its place. Now let's do a few turns on the last pulley that is the crankshaft pulley in order to ensure the correct position of the belt. Now we can reassemble the carter and the wheel cover and finally lower the car from the jack.
Posted on 11 June 2022 by ScegliAuto
How to reset the "Service" warning light on an Alfa Romeo 156
(Various brands) Various Before we can start, we will have to go and sit on the driver's seat of our Alfa Romeo 156. Let's start by activating the instrument panel, but witho
Timing belt replacement Fiat, Alfa Romeo, Lancia, 1.9 MultiJet
(Various brands) Various In today's video tutorial we will see the steps to be able to disassemble and replace the timing belt on the 1.9 MultiJet engines of Fiat, Lancia and
Reset of the service warning light on Alfa Romeo Stelvio
(Various brands) Various The procedure is valid for both Alfa Romeo Stelvio and Giulia. Get in your car and turn on the instrument panel, but leave the engine off. Wait for t Other guides that may interest you
|
Frequently Asked QuestionsDisassembly of the gear knob on the Lancia Ypsilon 2Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.099
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |