Do it yourself
Frequently asked questions about cars and motorcycles

How to replace a car key spring

Model: (Various brands) Various
Part: Key

Today we will describe the steps to replace the remote control spring and the battery itself. To perform the replacement, we need to insert a flat-tipped screwdriver into the remote control, so as to pry it open. Remove the microchip and the battery underneath. Insert the new battery and the microchip. Remove the key and the spring, insert the new spring and reposition the key. Close the remote control and test its operation by going near the vehicle, if the problem persists, it may be necessary to reprogram the key.

Posted on 19 May 2024 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various This video shows how to get a flip key spring that no longer works functioning again: first, open the remote with a flat screwdriver; excessive force…
(Various brands) Various Once the clutch assembly of the scooter is removed, proceed as follows: take utmost care when opening the clutch assembly, as the significant compres…
(Various brands) Various This video shows us how the physical principle of the thermostat works, which is an example of a heat transformer into mechanical motion. When cold, …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos