Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Get the Spring of a Flip Key Working Again

Model: (Various brands) Various
Part: Key

This video shows how to get a flip key spring that no longer works functioning again: first, open the remote with a flat screwdriver; excessive force is not needed, the two halves separate with light pressure. Hold the key button against the rear shell to prevent the spring from disengaging, and fully open the shell, exposing the spring mechanism. If the spring is loose, wind it counter-clockwise: usually, two full turns are enough to restore tension. Ensure the spring is securely hooked in its slot (there's a small channel where it should fit). While holding the spring in position with one hand, align the other half of the shell. Press gently until you hear a "click". Press the button: the key should pop out with force.

Posted on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace a car key spring
How to replace a car key spring
(Various brands) Various Today we will describe the steps to replace the remote control spring and the battery itself. To perform the replacement, we need to insert a flat-ti…
How to Remove the Clutch from a Scooter?
How to Remove the Clutch from a Scooter?
(Various brands) Various Once the clutch assembly of the scooter is removed, proceed as follows: take utmost care when opening the clutch assembly, as the significant compres…
How to disassemble a shock absorber without a spring compressor
How to disassemble a shock absorber without a spring compressor
(Various brands) Various To disassemble a shock absorber of a car, a specific tool is needed, called a "spring compressor", which is used to compress the spring of the shock …

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos